Computer Hardware Help
Articles To Save You From Computer Hardware Nightmares!
Computer Hardware Help Article:
Choosing a Tape Drive
1. Capacity
Select a tape drive that has sufficient capacity to store your backups. Tape drives are able to compress data so that more data may fit on the tape, which is why manufacturers specify both a native capacity and a compressed capacity, usuallywith a compression ratio at 2:1. However, highly-compressed files such as those in video and sound formats are hardly compressible at all. For this reason, do not heed the specified compressed capacity when choosing a tape drive.
A good way to determine the size of the backup job after compression is to study logs of past backups. If these are unavailable, it is safe to assume that the data can be compressed at a ratio of 1.4:1, unless the hard drive contains an usually large number of highly-compressed files.
2. Transfer rate
The transfer rate of the tape drive is becomes important when there is limited "window of opportunity" in which backup jobs may run. It is often desirable for backups to take place during the night when network use is at its lowest.
Select a tape drive that is capable of completing a backup job within your window of opportunity. For instance, to back up 400GB per night, you will require a transfer rate of about 30GB/hour.
A little known fact about tape drives is that data must be supplied to them at a sufficient rate in order to keep them streaming, or else the tape suffers from start-stop motion. This motion severely degrades the life of the drive and tapes and the reliability of backups.
There are two usual reasons why tape drive are not be supplied with data at a sufficient rate. Firstly, the rate at which data is read from the hard disk of the server is insufficient. This rate is dependent on the sizes and locations of the files on disk and is generally unpredictable, but can be determined by the use of specialised software.
Secondly, if data is being transferred over a network of computers to a backup server, the network may be incapable of supplying data at a sufficient rate. The maximum throughputof a network is predictable and easy to measure, based on previous network performance.
Consider a network using 10BaseT Ethernet. This transfer rate through this type of network cannot exceed 10MB/s, so it is immediately apparent that a tape drive requiring 20MB/s is inappropriate.
3. Reliability and duty cycle
A simple way to gauge the reliability of a tape drive is to find out the Mean Time Between Failure (MTBF) as specified by the manufacturer. You should note, however, that the MTBF is usually specified at a certain duty cycle. For example, consider a Travan tape drive with a MTBF of 370,000 hours at 20% duty cycle. The drive will only have an average of 370,000 hours between failures if it is run less than 20% of the time (about 4.8 hours per day), and running the tape drive for any longer will significantly reduce the reliability of the drive.
4. Price
There is no point purchasing the highest-range tape drive if it's simply too expensive. Consider how much value-for-money the tape drive will give you. Are you willing to pay morefor extra performance? Or do you need to sacrifice some performance to save on costs?
If you choose wisely, you should end up with a tape drive that fulfils your organization's tape backup and archiving needs, without blowing the budget.
Linus Chang is a backup expert and the lead developer of BackupAssist -- tape backup software that is simple and affordable, and perfect for small and medium businesses. Protect your Windows servers, including SQL Server and Exchange Server, to tape, REV drive, hard drive, NAS and more, at a fraction of the cost of other backup software.
Related Computer News and Articles From ezinearticles
The LTO-3 ultrium technology is backward compatible with previous versions so the users of ultrium-3 can access the LTO-1 and LTO-2 archives. Therefore, the investment made by the enterprise is secured for the future. Maxell ultrium-3 cartridge can be used in all the LTO tape drives of third generation.
Installing a new hard drive is a pretty simple task and the actual install only takes a few minutes to complete. The first thing to be done in this process is purchase the new hard drive and make sure that it is compatible with your system this can be done by consulting your motherboard manual and your operating systems guidelines on what hard drives are compatible.
Computers play a huge role in educating today's generation. With the necessity of knowing how word processors, internet connectivity, and other software applications work, it is almost a requirement for each student to have their own computer at home.
Buying a computer is not an easy decision. There are a lot of factors to consider other than just the price. You have to consider your needs, the specifications of the computer, aesthetics, and a whole lot more. And when you do get to finally decide on a computer, other decisions come into play, such as picking the best computer accessories.
However, as technology advances, the prices for these smaller and more powerful electronic devices drop. While the prices have not fallen significantly enough for the devices to be considered disposable, within time they just may.
You Can Own This Website!
This website is an example of a new product called article site manager developed especially for people who wish to own Adsense sites or sites to promote their own websites and products but do not have the technical ability to own or maintain a website.
Details about this site and other article sites in different categories can be found at the link below. Prices start at $259 for a complete website like this
Related Computer Hardware Articles:
Introduction to Dedicated Servers
The primary advantage of using a dedicated server over a typical shared hosting account is the sheer amount of resources and control available to you, the customer. In many cases, the client is at liberty to install whatever software they desire, giving them greater flexibility and administrative options. Dedicated server clients do not share resources, as those with shared hosting plans do; but rather, are at liberty to use all the resources available to them.
Purchasing Laser Toner Refills
Laser printers have two chief replaceable components: laser toner cartridges and drums. The laser toner is basically the ink for the paper. The drum is the cylindrical metal roller that applies the ink to the paper. Sometimes printers are designed for cartridges and drums to be separately replaceable; other printers are designed for cartridge-and-drum units bought as one. While the laser toner will last only a few thousand pages in most home printers, drums will last tens of thousands of pages. If you have to replace the drum every time you replace the cartridge, your printing costs will increase significantly. Therefore, if you don't yet have a printer, get one with separate slots for a laser toner cartridge and drum.
The Importance Of Current Sense Resistor In Switch Mode Power Supply
In monitor power supply where pulse width modulation (pwm) ic UC3842are used. Pin 3 of this power ic is called I-sense which meanscurrent sense and this pin is connected to source pin of POWER FET.The purpose of this current sense circuit is for overcurrent protection.This circuit usually samples the voltage drop across a resistor in serieswith the switching fet transistor. If the current rises abnormally due tosome short circuit in the secondary side such as a shorted secondary diodeor horizontal output transistor (HOT), the voltage will exceed a referencelevel and shutdown the pulse generator which is the PWM ic. This circuitprovides protection to components in the event a problem occurs.In some cases where overload happen-the power section will blow and most of the time the components changed are fuse, power fet, pwm ic,zener diode and current sense resistor.
The Athlon 64 FX-57 has an increased clock speed of 200 MHz bringing it to 2.8 GHz, up from the 2.6 GHz found in the FX-55. AMD didn't stop there though, they added a few extras to improve performance.
You may have experienced your computer intermittently re-booting for no apparent reason. This can be annoying, and can mean you have lost valuable work that you we in the process of creating.