Computer Hardware Help
Articles To Save You From Computer Hardware Nightmares!
Computer Hardware Help Article:
How To Refill Your Ink Cartridge
The following is included in a typical ink refill kit: ink bottles, syringes and detailed instructions. Some kits include an air balance clip for balancing the air inside the cartridge to ensure proper ink flow. Some kits also include hand-drill tool to make a hole in the top of your empty cartridge.
Refilling Process
1. To start the refilling process, fill the syringe with one of the ink colors over the sink or several sheets of scrap paper to prevent any mess. Different printers hold different amounts of ink. In most Epson printers, the black cartridge holds approximately 17 ml and the color cartridges hold approximately 8 ml. See the instructions with your refill kit to see how much ink your cartridges can hold.
2. Before inserting the needle, make a small hole in the top of the cartridge (one for each color chamber). The hole is at the top of the cartridge near the label. Simply push the needle through the hole and press to the bottom of the cartridge towards the outlet hole. It's important to fill the cartridge slowly so as to avoid the ink from foaming and introducing air in the chamber.
3. You do not need to seal the refill holes since there are already breather holes on the top of the cartridge.
4. Any unused ink can be put back in the bottle. You should clean the syringe with water and dry it properly to do the same process for the other cartridges or for future use. You can also label each syringe for the different colors so that each syringe is only used with one color.
5. Once you place the cartridge back in the printer, run the cleaning cycle 1 to 3 times. If there are any gaps in the printing, run the cleaning cycle again.
Don't Forget
There are a few things to remember when refilling your cartridge. It should be refilled before the cartridge is completely empty to avoid the chamber from drying out and clogging. Also, it is a good idea to let the printer cartridge sit for a few hours (or overnight) so that the pressure in the cartridge will stabilize.
Some printers, like newer Epson models, have a green chip on their ink cartridges which is visible by looking at your cartridge. They are often referred to as "Intellidge" cartridges. The chip keeps track of how often the cartridge is used and lets the computer know when the cartridge may be low or empty. As long as you reset the chip, refilling the cartridge with ink from a refill kit will not be a problem. A resetting tool can be used to reset the memory on the chip. This allows the printer to recognize the cartridge as being full which makes printing with a refilled cartridge possible.
Refilling your own ink cartridge is easy, good for the environment, and very good for your pocket.
Marisa Pellegrino
About The Author
A recent grad from Concordia University's English Department, Marisa uses her computer technology skills along side her writing skills to be the webmaster for www.printpot.com. Sharing her interest and expertise about ink jet refill kits has helped convince many of the advantages of refilling rather than discarding empty cartridges. Marissa can be reached at info@printpot.com.
Related Computer News and Articles From ezinearticles
The LTO-3 ultrium technology is backward compatible with previous versions so the users of ultrium-3 can access the LTO-1 and LTO-2 archives. Therefore, the investment made by the enterprise is secured for the future. Maxell ultrium-3 cartridge can be used in all the LTO tape drives of third generation.
Installing a new hard drive is a pretty simple task and the actual install only takes a few minutes to complete. The first thing to be done in this process is purchase the new hard drive and make sure that it is compatible with your system this can be done by consulting your motherboard manual and your operating systems guidelines on what hard drives are compatible.
Computers play a huge role in educating today's generation. With the necessity of knowing how word processors, internet connectivity, and other software applications work, it is almost a requirement for each student to have their own computer at home.
Buying a computer is not an easy decision. There are a lot of factors to consider other than just the price. You have to consider your needs, the specifications of the computer, aesthetics, and a whole lot more. And when you do get to finally decide on a computer, other decisions come into play, such as picking the best computer accessories.
However, as technology advances, the prices for these smaller and more powerful electronic devices drop. While the prices have not fallen significantly enough for the devices to be considered disposable, within time they just may.
You Can Own This Website!
This website is an example of a new product called article site manager developed especially for people who wish to own Adsense sites or sites to promote their own websites and products but do not have the technical ability to own or maintain a website.
Details about this site and other article sites in different categories can be found at the link below. Prices start at $259 for a complete website like this
Related Computer Hardware Articles:
Nvidia Geforce 7800 GTX Review
The 7800 GTX, which promises 600 MHz, 256 MB of 256-bit DDR3 memory and a graphics core clock speed of 430 MHz, is the absolute fastest video card, to date, that money can buy.
It's important to realize from the start that the duplication and replication process is the same, regardless of content, as well as the differences between the CD duplication and replication process.
Buying / Selecting Computer Components
There are many good places to buy computer parts. You can go to a computer retail store in your area. Although they often provide good warranties, you will pay a little more than you would in other places. Sometimes, a lot more.
How to Get the Case Off Your PC!
First things first, get that case off your PC. This is usually done by removing the screws on the back. Don't remove the ones near your power supply! This will cause your power supply to fall out. Simply remove the screws along the side that seem to be holding the case to the frame. Usually, this is about 6-9 screws. This will remove both sides. If you are aiming on only removing one side (sometimes this is best, as you only need to service one side) then remove the three screws holding the one side on. (For clone PCs. For IBM/Compaqs, refer below). After you've got the screws off either the one side, or both sides, simply slide the sides off towards the front side (the side where the power button is).
HIPPA Goes Mobile and Wireless for Hospitals and First Responders
Usually when new laws and regulations come along they are never welcomed, they cause costs to go up, cause chaos and some smart entrepreneur comes along and solves the problems, we have seen this in Aviation, Communication, Trucking, Auto Industry, Mining, Marine, Construction, Education and let's face it, we have seen it in all sectors. The new regulation is no matter how well intended always a problem. These rules when enforced by mandate rather than implementation by free market pressures and desires of patrons tend to cause the worst problems as, they inevitably are prostituted by greed, back door deals and controlled whiners of a system. The whiners think they are to attain justice, but usually end up causing a worse problem upon themselves and the whole of the users of the system.